Car maintenance expert - grinding and polishing materials
In the usual use of the car, it is inevitable that the body will be rushed all the way. Although automotive paint has little effect on the performance components of the car, it is not a small injury to you who loves you or who loves beauty! However, if the "face" of your car has received an influence, how to "recover the remedy"?
polishing wheel,zirconia abrasive belt,flap wheel,aluminia flap disc
1, shallow scratches
Due to the use of friction and improper daily care, the paint surface of the car has been slightly scratched for a long time, and the primer is not exposed. This scratch is obvious in the sun. It can be removed by a professional polishing method.
2, etch marks
The etch is a surface abrasion. Insects, bird droppings, sap, tar, and asphalt all have etch marks. Only a very small amount of abrasive polishing is available.
3, crack
If you do not take the necessary care for the paint, the metal paint may produce a very fine crack, which will continue to penetrate the paint until it "breaks through" the entire paint layer. This phenomenon is called "cracking." Sometimes cracks can occur due to problems with the quality of heavy paint. If there is car wax in the crack, you will find that the car body has a streak (tailing pattern) cracking phenomenon. Regular waxing can reduce cracking.
4, water marks
The water marks are ring-shaped. It is the trace left after the water droplets evaporate. The oxidized car and the car that is often washed by the washing spirit are more likely to be infected with water marks. When the water marks are slight, the waxing and polishing can be cured or painted when it is cured.
polishing wheel,zirconia abrasive belt,flap wheel,aluminia flap disc
5, traffic "film"
The car generates a strong electrostatic layer due to friction during driving. Static electricity has a strong adsorption capacity for dust, oil and chemical dust, and it takes a long time to form a hard traffic film. It is easy to cause oxidative corrosion of the paint surface and can be polished and polished.
6, paint surface oxidation
Under the illumination of the sun's ultraviolet rays, the paint film continuously evaporates the oil into the air to protect itself. A long time will make the oil on the paint surface disperse. The brightness and depth of the paint surface are greatly reduced, so that the paint surface is gradually whitened, forming an oxide layer and shortening the life of the paint. The paint can be observed by the naked eye as black, white and dull. Severe oxidation can be treated by grinding and polishing.
7, faded
Soots and pollutants in the atmosphere are the main causes of fading and discoloration of paints. Fading is different from oxidation. When fading occurs, uneven paint chromatic aberration occurs. Medium and light fading can be treated by grinding and polishing. In severe cases, it must be repainted.
Car buyers know that the parts and components of vehicles with different brands or different models are also good or bad, but if you don’t pay attention to maintenance, it’s futile to buy a good car, so car maintenance is very important, when driving the car to run some time When the day, don't forget to give the car regular maintenance to achieve the repair effect. When encountering some difficult problems, don't blindly “do it yourself”, and go to the professional repair shop for maintenance, so as to avoid “good help”.
Yihong abrasives | Sanders flap disc | Sanders flap wheel | Sanders abrasive belt
Flap Wheel | Abrasive Belt | Raw Material | Flap Wheel with Shank
Copyright ©Henan Sanders Abrasives Co.,Ltd All Rights Reserved. Technical Support By Yihong Century Network Technology Co., Ltd. Sitemap