The storage of the sanding belt is required for both temperature and humidity. If the humidity is too high or too low, the sanding belt will be deformed, and the deformation will reduce the bond strength of the belt. In particular, excessive humidity has a serious impact on the abrasive belt. In addition to water-resistant abrasive belts, the general belts are used after being damp, and they are prone to discounts and wrinkles, which cause the sanding belt machine to be scrapped. In addition, the abrasive material is easily adhered to the surface of the abrasive belt when the wet abrasive belt is ground, reducing the service life of the abrasive belt. The high temperature and low humidity have a great influence on the paper-based abrasive belt, which makes the paper-based abrasive belt brittle. It is easy to break and scrap when used. The abrasive belt should not be stored in a place with large temperature and humidity changes. The ideal temperature is: 18-220C; ideal The humidity is 40-65%. If the temperature is too high, the binder will age and reduce the service life of the belt. Synthetic fiber matrix belts (such as polyester cloth belts) are sensitive to cold and cannot be stored in cold warehouses.
Yihong abrasives | Sanders flap disc | Sanders flap wheel | Sanders abrasive belt
Flap Wheel | Abrasive Belt | Raw Material | Flap Wheel with Shank
Copyright ©Henan Sanders Abrasives Co.,Ltd All Rights Reserved. Technical Support By Yihong Century Network Technology Co., Ltd. Sitemap